stretch wrapping machine 自動拉伸膜纏繞包裝機 2.Model 型號：ET300SPS人機界面顯示屏 ?Heavy steel Structure 鋼制桅桿，堅固耐用 ?Heavy turntable 鋼制旋轉轉盤，承重力 ?Turntable Max load weight 2000kg 轉盤較大承重2000kg ?Turntable diameter1650mm 轉盤直徑1650mm ?Max load height 1800mm 可檢測高度較高1800mm ?Automatic height sensing via photocell 自動偵測托盤物料的高度 ?Carriage up/down movement controlled by dedicated for film overlapping parameters setting from control panel 膜架升降速度可調，以控制膜的重疊比例 ?Automatic pre-tension，F(xiàn)ast film installation. 自動預拉伸機頭，快速穿膜機構 ?Electricity protect class IP54 保護等級IP54 ?EURO CE 歐洲CE 認證 3.Panel 操作面板控制 ?Variable turntable speed 4 -12 rpm (frequency controll) 轉盤速度可調4-12 轉/分鐘（變頻控制） ?Machine Carriage speed 1.4-4 mt/min (frequency controll) 膜架升降速度可調1.4-4 米/分鐘（變頻控制） ?Variable adjustable number of wrappings top and bottom. 頂和底部纏繞包裝圈數可設定 ?MANUAL CARRIAGE “UP” and “dn”. 手動操作膜架升降 ? MANUAL CYCLE 手動操作模式 ?Photocell sensing delay Ecoplat Base 光電頂部延遲 ? Power Switch 開關電源 ?Safety stop button, Pneumatic button 急停按鈕，啟動按鈕 4.DESCRIPTION 技術描述 4.1 Rear and front forklift portability 前后均有叉車槽口 4.2采用雙鏈條結構，膜架上升、下降速度分別可調，送膜速度可調 （立柱采用冷軋鋼板，厚度完全符合標準，堅固耐用。國內導軌采用U型導軌；具有雙向定位、噪音小，膜架上升下降平穩性耐用，特別針對超高貨物的包裝。） 4.3變頻動力預拉伸開門型膜架，隨動感應桿控制送膜電機出膜，一拉即可，更適合要求更美觀，更節省薄膜，更注重安全規程的企業使用； 4.4 Base with nylon rollers on bearings that guarantee a precise rotation and a low level of noise. Turntable height only 77mm 軸承尼龍輪運轉平穩、噪音低，高度只有77mm 4.5 Steel structure with carriage wheel guides along the entire length. 膜架滑動槽由高強度鋼制 沖壓工藝制成。 4.6 High structural rigidity, made with an internal ribbing. 高強度的內部機構設計 4.7 Rounded corners resulting from careful work during the Design phase. 圓弧型設計，增強型結構 4.8 Internal structure of the post reinforced with folded ribbings that reduce the number of welds Post is completely painted,even internally,to avoid rust. 內部的結構設計，鋼板的折彎有效的減少焊接甚至在狹小的內部的材料都做了表面處理，防止生銹。