經濟AC伺服橫走式機械手臂
BRA700/900系列適用于100-300頓的各型臥式射出成型機的成品及水口取出。上下手臂結構是雙截式,分單臂和雙臂,適合二/三板模具產品取出。模行AC伺服馬達驅動,定位,速度快,壽命長,故障底。安裝機械手可增加產能(10-30%)、降低產品的不良率、保障操作人員的安全性、減少人工、控制生產量、減少浪費、納期。
- 掌上型對話式操作器簡單易學
- 內置八組程式,具備L/U程式取出功能
- 適合各種類型的模具產品取出
- 橫行AC伺服可循環放置99點
機型表示:W:雙截式
D:雙臂機械手(成品臂 料頭臂)
S:單臂機械手(成品臂)
Y:橫行AC伺服馬達驅動
Economic AC Servo Driven Traversing Robot Arm
BRA700/900 Series traversing robot arm is applicable to all types of horizontal injection machine ranges of 100~300T for take-out products and sprues. Vertical arm is telescopic type, with product arm and runner arm, for two plate or three plate mold products take out. Traverse axle driven by AC servo motor. After installed this robot, the productivity will be increased 10~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
- Palm controller with dialogue type operation interface, the display language is changeable, easy for learn.
- Eight sets built-in programs, with L/U take out function.
- Applicable to all types of products take out.
- Traverse stroke can be used to place products in multiple points (99 points at most) to stacking products.
Denote:
W: Telescopic type.
D: Product arm runner arm.
S: Product arm
Y: AC Servo driven on traverse axis.
主要規格
機型 | BRA700WDY/WSY | BRA900WDY/WSY |
電源容量(KVA) | 0.6 | |
適用成型機(ton) | 100-200 | 200-320 |
橫行行程(mm) | 1300 | 1300 |
橫行驅動方式 | AC 伺服馬達 | |
引拔行程(mm) | P:170 R:120 | |
上下行程(mm) | 700 | 900 |
較大荷載(kg) | 3 | 3 |
取出時間(sec) | 1.6 | 1.8 |
全循環時間(sec) | 8.5 | 10.5 |
空氣消耗量(Nl/cycle) | 22 | 25 |
凈重(kg) | 145-200 | 150-230 |